|
Search
Search through the thousands of lawsuits, complaints and recalls on our site.
|
Cannondale Recalls 2007 Model Road Bicycles Due to Brake FailureDate: 1/16/2007
Reason: Brake Failure
WASHINGTON , D.C. - The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. Name of Product: Cannondale 2007 Model Road Bicycles Units: About 700 Manufacturer: Cannondale Bicycle Corp., of Bethel, Conn. Hazard: The bicycle's front brake can fail, causing the rider to lose control and fall. Incidents/Injuries: No injuries have been reported. Description: The recalled road racing bicycles are made from aluminum and carbon fiber or all carbon fiber. The model name is printed on the bicycle's top tube. They were sold in the following colors: natural aluminum/carbon, red, black or black and blue. Recalled models include:
Manufactured in: United States Remedy: Consumers should stop using the bicycles immediately until inspected or repaired. Cannondale or Authorized Cannondale Dealers have contacted affected consumers directly for a free inspection and repair, if necessary. Consumer Contact: Consumers with one of the recalled models who have not been contacted by Cannondale or an Authorized Cannondale Dealer can contact Cannondale at (800) BIKE-USA between 9 a.m. and 5 p.m. ET Monday through Friday, or visit the firm's Web site at www.cannondale.com
Other Outdoors Recalls and Alerts of InterestDate: 9/11/2008 Reason: UNDER SOME CIRCUMSTANCES STEERING STEM ARM ABRASION WITH A FUEL VENT HOSE MAY CAUSE FUEL AND OR VAPOR LEAKAGE - POSSIBLE FIRE OR EXPLOSION IF IGNITION SOURCE PRESENT. Distribution: NATIONWIDE Date: 9/8/2008 Reason: The top of the bicycle handlebar stem can crack and cause the rider to lose control, posing a crash hazard. Distribution: Nationwide. Date: 9/26/2008 Reason: Cracks can develop in the welded joints of the drive axle assembly of the snowmobile and can result in complete breakage. If this happens the track of the vehicle can unexpectedly lock, causing riders to be ejected off the vehicle or lose control and collide with bystanders, a fixed object or other vehicles. Distribution: Nationwide Date: 9/15/2008 Reason: Over-tightening of the DIN retainer by a technician during installation can result in the retainer breaking under pressure, a rapid escape of air from the scuba cylinder, and the regulator detaching from the scuba cylinder. Distribution: Nationwide. Date: 10/27/2008 Reason: Rim surface and spoke hole plugs on the wheel can cause a puncture to the inner tube, resulting in a flat tire. This can cause the rider to lose control and fall. Distribution: Nationwide Date: 10/3/2008 Reason: The boiler can leak gas, posing a fire hazard to consumers. Distribution: Nationwide |
|
© 2000 - 2008 Copyright. All rights reserved nola3, llc.







